NEC Computer Monitor NLT 15 User Manual

Contents  
Before operating the set, please read this manual carefully.  
Contents  
Warnings  
1
2~3  
4
5~7  
5
Supplied Accessories  
Controls  
Controller of panel  
Remote controller  
Installations  
Owner's Manual  
6~7  
8
Basic Operation  
Turning the TV On and off  
Programme selection  
Volume adjustment  
Q.View  
9
9
9
9
9
Mute Function  
9
On screen Language selection  
On Screen Display  
Setting up TV programme  
Auto programme  
Manual programme  
Programme edit  
Picture Control  
9
10  
11~13  
11  
12  
13  
14  
Manual picture control  
Auto picture control  
Sound Control  
14  
14  
15  
Other functions  
16~17  
16  
TV, COMPONENT, VIDEO, S-VIDEO mode  
Auto sleep  
16  
Blue back  
16  
Sleep timer  
17  
Sound output selection  
Teletext  
17  
18~19  
18  
Text On/Off  
TOP text  
18  
FLOF text  
18  
Special Teletext function  
Connecting external equipment  
Antenna connection  
COMPONENT INPUT  
A/V-Inputs  
19  
20~21  
20  
20  
20  
S-VIDEO-Input  
21  
Headphone jack  
Connecting PC as Monitor  
Product Specifications  
Troubleshooting  
21  
22~23  
24  
Model:NLT-15  
25  
1
 
Controls  
Supplied Accessories  
L Make Sure the following accessories are provided with Product.  
<<CONTROLLER OF PANEL>>  
1. MENU  
1. DC Adaptor  
2. AC Cord  
Displays a menu.  
2. y PR x (Programme Up/Down)  
Selects a programme or a menu item.  
3. POWER STANDBY INDICATOR  
Illuminates red when the TV is in standby mode. / Illumintes green when the TV is  
switched on.  
4. POWER Switches TV set on or off.  
5. Remote control sensor Accepts the IR signal of remote controller.  
6. ÏVOLq (Volume Up/Down)  
Adjusts the volume./ Adjusts menu settings.  
7. TV/AV  
4. Batteries (AAA type)  
3. Remote control  
POWER  
Selects TV, COMPONENT, VIDEO, S-VIDEO or PC mode / Clears the menu from the  
screen.  
3
5
SSM  
PSM  
I/II  
Q.VIEW  
MENU  
TV/AV  
PRV  
OK  
MENU  
PR  
VOL  
TV/AV  
CVOL  
VOLB  
PRW  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
TIME  
REVEAL  
1
2
4
6
7
5. Owner’s manual  
6. PC IN cable  
Owner's Manual  
1
2
3
4
5
6
7
8
Model:NLT-15  
1 Ant. (Antenna input)  
2. DC12V adaptor input  
3. PC/DTV INPUT  
4. COMPONENT INPUT  
5. HEADPHONE out  
7. PC Audio IN cable  
Connect a headphone to this socket.  
6. S-VIDEO Input  
Connect the output of an S -VIDEO VCR to the S-VIDEO input.  
Connect the audio outputs of an S-VIDEO VCR to the AV-IN audio inputs.  
7. A/V-IN Inputs  
Connect the Audio/Video outputs of external equipment to these inputs.  
8. PC Audio IN  
Connect the audio cable from the PC to the PC Audio IN of the set.  
4
5
 
Controls  
Controls  
All the functions can be controlled with the remote controller handset. Some  
functions can also be adjusted with the buttons on the front panel of the set.  
10. PRxy (Programme Up/Down)  
POWER  
Selects next programme or a menu item.  
Remote controller  
11. OK  
Before you use the remote controller, please install the  
POWER  
Accepts your selection or displays the current mode.  
batteries.  
1
2
12. VOLÏq (Volume Up/Down)  
Adjusts the sound level.  
1. POWER  
3
5
SSM  
PSM  
Turns the TV on from standby or off to standby.  
13. SLEEP  
Sets the sleep timer.  
I/II  
Q.VIEW  
PRV  
2. MUTE  
MENU  
TV/AV  
Note : In teletext mode, the SLEEP is used for teletext  
4
Turns the sound on or off.  
SSM  
PSM  
function.  
11  
CVOL  
VOLB  
OK  
10  
6
9
3. NUMBER buttons  
I/II  
Q.VIEW  
PRV  
7
8
14. TELETEXT buttons  
MENU  
TV/AV  
PRW  
Selects programme numbers  
These buttons are used for teletext.  
For further details, see the ‘Teletext’ section.  
12  
14  
13  
15  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
CVOL  
VOLB  
OK  
4. PSM (Picture Status Memory)  
TIME  
REVEAL  
PRW  
Recalls your preferred picture setting.  
15. ARC/* (Aspect Ratio Control)  
Selects a screen mode.- 4:3,16:9 or ZOOM.  
ż Only the ARC/* button is operated at LCD 17” Wide  
(NEC NLT-17W).  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
5. SSM(Sound Status Memory)  
Recalls your preferred sound setting.  
TIME  
REVEAL  
6. TV/AV  
Selects TV, COMPONENT, VIDEO, S-VIDEO or PC mode.  
Clears the menu from the screen.  
Battery Installation  
uInserting batteries  
1. Pull the battery cover upward in the arrow direction to remove.  
2. Insert the batteries with correct polarity.  
3 .Put the battery cover back.  
7. MENU  
Displays a main menu.  
8. I/II  
Selects the language during dual language broadcast.  
Selects the sound output.  
N
N
9. Q.VIEW  
Returns to the previously viewed Programme.  
* Apply two 1.5V alkaline batteries of AAA type. Don’t mix the used batteries with new  
batteries.  
* Remove batteries when you don’t use the remote control for long time. Liquid  
leakage from old battery may cause operation failure.  
uNotes for using remote control  
Make sure there are no objects between the remote control and its sensor.  
Don’t place the remote control near a heater or damp place. Strong impact on  
remote control may cause operation failure.  
Signal from the remote control may be disturbed by sun light or other strong light.  
In this case, turn the set to other direction.  
6
7
 
Installation  
Basic Operation  
Installation Options  
Turning the TV On and Off  
* You can install the TV on a wall or place it on a table-like surface.  
* To eliminate any risk of injury from the TV falling, it should be mounted securely.  
POWER  
Standby Setup: The AC-DC converter and the AC power cord  
must be set up and connected to have the TV in standby  
mode ready to be turned on.  
1. Wall Installation  
Press the power button on the front panel of the TV to go into  
standby mode.  
Caution: Do not install the TV on a weak wall surface, like plaster etc. It is not needed  
any bracket or installation accessory with the exception of 2 nails or screws. Distance  
of holes of back panel is 305mm,  
1. If the TV is in standby mode, press the Power button on  
the remote controller or the TV itself to turn the TV on.  
2. Press the Power button again on the remote controller  
or the TV itself to turn the TV off.  
a. Drive 2 nails or screws on the wall, in the location you want to install the TV.  
b. Hang the TV on the nails or screws.  
SSM  
PSM  
Note : If the TV is on and the power button is pressed to turn  
I/II  
Q.VIEW  
PRV  
the TV off, the TV goes into standby mode.  
MENU  
TV/AV  
305mm  
CVOL  
VOLB  
OK  
Programme selection  
PRW  
You can select a Programme number with the PRxy button  
or NUMBER buttons.  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
TIME  
REVEAL  
Volume adjustment  
Press the VOLÏq button to adjust the sound level.  
Quick view  
Press the Q.VIEW button to view the last channel you were  
watching.  
2. Desktop Installation  
Sound mute function  
Press the MUTE button. The sound is switched off and the  
mute display  
appears.  
To cancel mute mode, press the MUTE button again, VOLÏq  
or SSM button.  
On screen menu language selection Language  
English  
Deutsch  
Français  
Italiano  
The menu can be displayed on the screen in desired  
language.  
First select your language.  
1. Press the MENU button.  
2. Select the Setup menu.  
Then press the VOLÏq button.  
3. Select the Language menu.  
Español  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
4. Press the PRxy button to select your desired  
language.  
5. Press the TV/AV button.  
All the on screen displays will appear in the selected  
language.  
8
9
 
On Screen Display  
Setting up TV Programme  
1. Press the MENU button to display main menu.  
2. Press the PR xy button to select menus-Picture, Sound, Special, Setup.  
3. Adjust each menu with the VOLÏq button.  
4. Press the MENU button to return to preceding menu.  
5. Press the TV/AV button to finish adjusting menu.  
Up to 100 TV Programmes can be stored in this set by  
Auto programme  
programme numbers. Once you have preset the  
programmes, you will be able to use the PRxy or  
NUMBER button to scan the programmes you programmed.  
Programmes can be tuned using automatic or manual  
modes.  
System  
BG  
1
Storage from  
Start  
Equalizer  
Flat  
Music  
Movie  
Main menu  
Picture  
Sound  
Special  
Setup  
Picture  
Contrast  
Brightness  
Colour  
Speech  
User  
90  
75  
70  
50  
Auto programme  
q
q
q
q
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
All Programmes that can be received are stored by this  
method. It is recommended that you use auto programme  
during installation of this set.  
ꢂꢃꢄ ꢂꢃꢅ ꢄꢃꢅꢀ ꢅꢃꢂꢀꢀꢄꢂ3Pb  
Sharpness  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
POWER  
1. Press the MENU button.  
Auto programme  
2. Select the Setup menu. Then press the VOLÏq button.  
3. Select the Auto programme menu. Then press the  
VOLÏq button.  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
System  
BG  
1
Storage from  
Start  
4. Press the PRxy button to select System.  
5. Select a TV system with the VOLÏq button;  
BG : (Germany/Asia/M.East/Africa/Australia)  
Sound  
Equalizer  
Balance  
AVL  
Ș
0
Off  
Off  
POWER  
I
: (UK/Hong Kong/South Africa)  
DK : (CIS/China/East Europe)  
: (USA/Korea/Philippines)  
Surround  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
SSM  
PSM  
M
6. Press the PRxy button to select Storage from.  
7. Select the beginning programme number with the  
VOLÏq button or NUMBER buttons.  
8. Select Start, then press the VOLÏq button.  
Press Menu button to finish Auto programme.  
9. Press the TV/AV button to return to normal TV viewing.  
Manual programme  
System  
Channel  
Fine  
BG  
1
I/II  
Q.VIEW  
PRV  
MENU  
TV/AV  
V/UHF  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
ȘȘȘ  
ȘȘȘ  
C 01  
1
Search  
Name  
Storage  
CVOL  
VOLB  
OK  
Special  
SSM  
PSM  
Input  
TV  
Off  
Off  
PRW  
Auto Sleep  
Blue back  
ƇƉ ȖȘ 73ꢀꢀꢀ<>ꢁ)>  
I/II  
Q.VIEW  
PRV  
MENU  
TV/AV  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
Programme edit  
TIME  
REVEAL  
0 C 6  
1 C 6  
2 C 6  
3 C 6  
4 C 6  
Skip  
5 C 6  
6 C 6  
CVOL  
VOLB  
OK  
7 C 6  
8 C 6  
9 C 6  
Move  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
PRW  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
Setup  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
Auto programme  
Manual programme  
Programme edit  
Language  
Ș
Ș
Ș
Ș
TIME  
REVEAL  
Language  
English  
Deutsch  
Français  
Italiano  
Español  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
10  
11  
 
Setting up TV Programme  
Setting up TV Programme  
Manual programme  
Programme edit  
Programme edit  
Manual programme  
System  
Channel  
Fine  
BG  
1
0 C 6  
1 C 6  
2 C 6  
3 C 6  
4 C 6  
Skip  
5 C 6  
Manual programme lets you manually tune and arrange  
the Programme in whatever order you desire. Also you  
can assign a Programme name with five characters to  
each programme number.  
This function enables you to delete or skip the stored  
programmes.  
V/UHF  
6 C 6  
7 C 6  
8 C 6  
9 C 6  
Move  
ȘȘȘ  
ȘȘȘ  
C 01  
1
1. Press the MENU button.  
Search  
Name  
Storage  
2. Select the Setup menu. Then press the VOLÏq button.  
3. Press the PRxy button select Programme edit Then  
press the VOLÏq button.  
1. Press the MENU button.  
2. Select the Setup menu. Then press the VOLÏq  
button.  
3. Select Manual programme. Then press the VOLÏq  
button.  
ƇƉ ȖȘ 73ꢀꢀꢀ<>ꢁ)>  
xy  
and  
4. Select the programme name to edit with the PR  
VOLÏq button.  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
4. Press the PRxy button to select System.  
5. Select a TV system with the VOLÏq button.  
BG : (Germany/Asia/M.East/Africa/Australia)  
Skipping a Programme  
POWER  
POWER  
1. Select a number to be skipped with the PRxy or  
VOLÏq button.  
2. Press the Green button. The skipped programme turns  
to blue.  
3. Press the Green button again to release the skipped  
programme.  
4. Press the TV/AV button to return to normal TV viewing.  
I
: (UK/Hong Kong/South Africa)  
DK : (CIS/China/East Europe)  
: (USA/Korea/Philippines)  
M
6. Press the PRxy button to select Channel.  
7. Press the VOLÏq button to select V/UHF or Cable as  
required. If possible, select the programme number  
directly with the number buttons.  
Moving a programme  
8. Press the PRxy button to select Search. Press the  
VOLÏq button to commence searching.  
If a Programme is found the search will stop.  
9. Press the PRxy button to select NAME, Press the  
VOLÏq button to allocate the location and use  
PRxy button to select the character. (blank, +, -,  
Alphabet A to Z, Numeric 0 to 9)  
1. Select a programme to be moved with the PRxy or  
VOLÏq button.  
SSM  
PSM  
SSM  
PSM  
2. Press the Yellow button.  
I/II  
Q.VIEW  
PRV  
I/II  
Q.VIEW  
PRV  
3. Move the programme to desired programme number  
with the PRxy or VOLÏq button.  
4. Press the Yellow button again to release this function.  
5. Press the TV/AV button to return to normal TV viewing.  
MENU  
TV/AV  
MENU  
TV/AV  
CVOL  
VOLB  
OK  
CVOL  
VOLB  
OK  
10. If this Programme is the one required, press the  
PRxy button to select Storage. Select the desired  
programme number with the VOLÏq button or  
NUMBER buttons.  
11. Press the OK button to store it. The display Stored  
will appear.  
PRW  
PRW  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
TIME  
REVEAL  
TIME  
REVEAL  
To store another Programme, repeat steps 5 to 11.  
12. If the TV picture reception is not good, then do the  
fine tuning. Select FINE, then adjust the received  
signal with the VOLÏq button.  
12  
13  
 
Picture Control  
Sound Control  
You can adjust picture Contrast, Brightness, Colour Sharpness and Tint to the levels  
you prefer.  
You can select your preferred sound setting; Flat, Music,  
Movie or Speech and you can also adjust the sound  
frequency of equalizer, balance. If you switch AVL to on,  
the set automatically keeps on an equal volume level even  
if you change programmes.  
Sound  
Equalizer  
Balance  
AVL  
Ș
0
Off  
Off  
Picture  
Contrast  
Brightness  
Colour  
90  
75  
70  
50  
Manual Picture Control  
Surround  
1. Press the MENU button.  
1. Press the MENU button.  
2. Select the Picture menu. Then press the VOLÏq button.  
3. Press the PRxy button to select a picture item.  
4. Press the VOLÏq button to adjust the picture condition  
as you want.  
Sharpness  
2. Select the Sound menu. Then press the VOLÏq button.  
3. Press the PRxy button to select the desired sound  
item; Equalizer, Balance, AVL or Surround.  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
4. Press the VOLÏq button to make desired adjustment.  
5. Press the TV/AV button to store for the picture User.  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
POWER  
Equalizer  
Flat  
Music  
Movie  
Speech  
Selected Item  
Contrast  
Setting Change  
POWER  
More darkness VOLÏ 0~100 qVOL More light  
Less bright VOLÏ 0~100 qVOL More bright  
Lower color intensity VOLÏ 0~100 qVOL Higher color intensity  
Soft picture VOLÏ 0~100 qVOL Sharp picture  
User  
ꢂꢃꢄ ꢂꢃꢅ ꢄꢃꢅꢀ ꢅꢃꢂꢀꢀꢄꢂ3Pb  
Brightness  
Colour  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
SSM  
PSM  
5. At Equalizer selection, press the PR  
xy  
button to select  
your preferred setting ; Flat, Music, Movie, Speech or  
User. To set the Equalizer User.  
I/II  
Q.VIEW  
PRV  
Sharpness  
MENU  
TV/AV  
a. Select User by pressing the PRxy button.  
b. Select a sound band by pressing the VOLÏq button.  
c. Make appropriate sound level with the PRxy button.  
d. Press the MENU button to return to preceding MENU  
and the TV/AV button to return to normal TV viewing.  
SSM  
PSM  
* Tint menu only appears at NTSC signal.  
CVOL  
VOLB  
OK  
I/II  
Q.VIEW  
PRV  
PRW  
MENU  
TV/AV  
Auto Picture Control  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
* The sound Flat, Music, Movie and Speech are  
programmed for good sound reproduction at the factory  
and cannot be changed.  
PSM (Picture Status Memory)  
CVOL  
VOLB  
OK  
1. Press the PSM button.  
TIME  
REVEAL  
2. Press the PSM button repeatedly to select [PSM].  
3. Press the OK button.  
PRW  
6. Select the Balance menu and adjust the balance of  
speakers.  
7. Select the AVL(Automatic Volume Leveler) menu On or Off.  
8. Select the Surround menu On or Off.  
Each press of the button changes the screen display  
as below.  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
TIME  
REVEAL  
Dynamic 
؋
 Standard 
؋
 Mild 
؋
 Game 
؋
 User  
Auto Sound Control  
SSM (Sound Status Memory)  
• Dynamic : Vivid Picture Appearance  
• Standard : Standard Picture Appearance  
• Mild : Softer Picture Appearance  
• Game : External Video Game Picture Setup  
• User : Manual Picture Setup  
1. Press the SSM button.  
2. Press the SSM button repeatedly to select [SSM].  
3. Press the OK button.  
Each press of the button changes the screen display as below.  
Flat 
؋
 Music 
؋
 Movie 
؋
 Speech 
؋
 User  
14  
15  
 
Other functions  
Other functions  
TV, COMPONENT, VIDEO and S-VIDEO modes  
(You can’t set PC mode in this menu. Use the TV/AV button)  
Inputs can be set for COMPONENT, VIDEO or S-VIDEO  
mode. The COMPONENT, VIDEO or S-VIDEO mode is  
used when a video cassette recorder (VCR), or other  
equipment is connected to the set.  
Note : When a VCR is connected to the aerial socket the  
set is used in TV mode. See the Connection of external  
equipment section.  
Sleep timer  
Special  
Input  
Auto sleep  
Blue back  
TV  
Off  
Off  
You don’t have to remember to switch the set off before  
you go to sleep. The sleep timer automatically switches  
the set to standby after the preset time elapses.  
Press the SLEEP button to select the number of  
minutes.  
The display will appear on the screen, followed by 0, 10,  
20, 30, 60, 90, 120, 180 and 240. The timer begins to  
count down from the number of minutes selected.  
Note : a. To view the remaining sleep time, press the  
SLEEP button once.  
120  
B
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
1. Press the MENU button.  
2. Select the Special menu.  
POWER  
3. Press the PRxy button to select Input.  
4. Press the VOLÏq button to select TV,  
COMPONENT, VIDEO, S-VIDEO.  
b. To cancel the sleep time, repeatedly press the  
SLEEP button until it displays “0”.  
POWER  
COMPONENT : COMPONENT OUT connected to the  
Sound output selection  
In VIDEO mode, you can select output sound for the left  
and right loud-speakers.  
COMPONENT INPUT of the set.  
VIDEO : VIDEO OUT connected to the VIDEO input of the  
set.  
S-VIDEO : S-VIDEO OUT of VCR connected to the S-  
VIDEO input of the set.  
Repeatedly press the I/II button to select the sound  
output.  
L+R : Audio signal from audio L input is sent to left loud-  
speaker and audio signal from audio R input is  
sent to right loud-speaker.  
SSM  
PSM  
SSM  
PSM  
Alternatively you can select the TV, COMPONENT,VIDEO,  
S-VIDEO or PC mode by pressing the TV/AV button.  
L+L : Audio signal from audio L input is sent to left and  
right loud-speakers.  
R+R : Audio signal from audio R input is sent to left and  
right loud-speakers.  
I/II  
Q.VIEW  
PRV  
MENU  
TV/AV  
I/II  
Q.VIEW  
PRV  
MENU  
TV/AV  
CVOL  
VOLB  
OK  
Auto sleep  
CVOL  
VOLB  
OK  
If you select Auto sleep On the set will automatically  
switch itself to standby mode approximately ten minutes  
after a TV Channel stops broadcasting.  
1. Press the MENU button.  
PRW  
PRW  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
2. Select the Special menu. Then press the VOLÏq  
button.  
TIME  
REVEAL  
TIME  
REVEAL  
3. Press the PRxy button to select Auto sleep.  
4. Press the VOLÏq button to select On.  
5. Press the TV/AV button to return to normal TV  
viewing.  
Blue back  
No signal channel is expressed as a blue screen.  
16  
17  
 
Teletext  
Teletext  
TEXT On/Off  
Special Teletext functions  
MENU  
Press the TEXT/MIX button to switch to teletext. The initial  
page or last selected page appears on the screen. Two  
page numbers, TV Programme name, date and time are  
displayed on the screen headline. The first page number  
indicates your selection, while the second shows the  
current page displayed.  
POWER  
Functions  
Changes teletext mode  
; only teletext mode, text mode superimposed on the  
TV picture, TV mode  
TEXT/MIX  
1. Press TEXT/MIX button once to set the TEXT mode.  
2. Press TEXT/MIX button once more displays the  
teletext pages superimposed on the TV picture.  
3. Press the TEXT/MIX button to switch off teletext.  
Text mode is off and TV mode appears.  
4. If you press TEXT/MIX button repeatedly displays  
are changed as below.  
Selects double height text.  
Press this button to enlarge the top half of the page.  
Press this button again to enlarge the bottom half of  
the page.  
SIZE  
SSM  
PSM  
Press this button again to return to the normal display.  
I/II  
Q.VIEW  
PRV  
Stops the automatic page change which will occur if a  
teletext page consists of 2 or more sub pages. The  
number of sub pages and the sub page displayed is,  
usually, shown on the screen below the time. When  
this button is pressed the stop symbol is displayed at  
the top left-hand corner of the screen and the  
automatic page change is inhibited. To continue press  
this button again.  
MENU  
TV/AV  
TEXT 
؋
 MIX 
؋
 TV mode  
CVOL  
VOLB  
OK  
HOLD  
PRW  
TOP text  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
The user guide displays four fields-red, green, yellow and  
blue at the bottom of the screen. The yellow field denotes  
the next group and the blue field indicates the next block.  
TIME  
REVEAL  
Return to index page  
INDEX  
Group/block/page selection  
1. With the BLUE button you can progress from block to  
block.  
2. Use the YELLOW button to proceed to the next group  
with automatic overflow to the next block.  
3. With the GREEN button you can proceed to the next  
existing page with automatic overflow to the next  
group. Alternatively the PRx button can be used.  
4. The RED button permits to return to previous selection.  
Alternatively the PRy button can be used.  
Displays the TV picture on the screen while waiting for  
the new teletext page. The display will appear at the  
top left hand corner of the screen. When the updated  
page is available then display will change to the page  
number.  
UPDATE  
Press this button to view the updated teletext page.  
When viewing a TV programme, press this button to  
display the time at the top right hand corner of the  
screen. Press this button again to remove the display.  
In teletext mode press this button to select and hold or  
change a four digit sub page number. This is displayed  
along the bottom of the screen. Press this button again  
to exit this function.  
FLOF text  
The teletext pages are colour coded along the bottom of  
the screen and are selected by pressing the corresponding  
coloured button.  
TIME  
Page selection  
1. Press the  
button to select the index page.  
2. You can select the pages which are colour coded along  
the bottom line with the same coloured buttons.  
3. The VOLÏq button can be used to select the  
preceding or following page.  
Press this button to display the concealed information,  
such as solutions of riddles or puzzles.  
Press this button again to remove the information from  
the display.  
REVEAL  
18  
19  
 
External Equipment Connection  
External Equipment Connection  
When connecting to external equipment, please ensure you turn the main switch OFF  
to prevent any damage to the equipment.  
You can connect additional equipment, such as VCRs, camcorders etc. to your set.  
Examples are shown below.  
S-VIDEO INPUT  
If using an S-VIDEO source, the picture quality will be  
improved over a video source.  
1. Connect the S-VIDEO output of a VCR to the  
A/V-IN  
S-VIDEO  
L(MONO)  
R
S-VIDEO input on the TV.  
2. Connect the audio cables from the S-VIDEO  
VCR to the L (MONO) R inputs on the TV.  
3. Select S-VIDEO mode by pressing the TV/AV  
button repeatedly.  
Antenna connection  
1. Connect RF out on the VCR to the Antenna input  
on the rear of the TV.  
2. Connect the antenna cable to the antenna in  
ANT. POWER  
VCR  
4. Press the PLAY button on the VCR.  
The VCR playback picture appears on the screen.  
jack on the VCR.  
3. Press the TV/AV button to select Antenna input  
source.  
4. Press the PLAY button on the VCR.  
VCR  
Headphone jack  
Insert the headphone plug to the headphone jack on the TV. You can listen to the  
sound through the headphone; no sound form the speaker on the TV. To adjust the  
headphone volume, press the VOLÏq button. If you press the MUTE button, the  
sound from the headphone is turned off.  
COMPONENT INPUT  
1. Connect the Video outputs (Y Cb Cr) on a DVD  
POWER  
L
R
to the COMPONENT on the TV.  
2. Press the TV/AV button to select COMPONENT  
mode.  
Headphone  
3. Press the PLAY button on the DVD.  
COMPONENT  
(DVD)  
A/V INPUT  
1. Connect the A/V out jacks on a VCR to A/V-IN jacks on  
the TV.  
A/V-IN  
L(MONO)  
R
2. Press the TV/AV button to select VIDEO mode.  
3. Press the PLAY button on the VCR.  
The VCR playback picture appears on the TV screen.  
Note : If you have a mono VCR, connect the audio cable  
VCR  
from the VCR to the L(MONO) socket of the set.  
20  
21  
 
Connecting PC as monitor  
Connecting PC as monitor  
VGA/DTV INPUT  
1. Connect the VGA IN cable  
(D sub jack) from the  
Picture adjustment  
Contrast  
You can adjust picture Contrast, Brightness, Temperature,  
Horizontal/Vertical position, Clock, Phase, Auto and Reset  
x
monitor output socket of  
the PC to the PC/DTV  
input socket of the set.  
as you prefer.  
0
Ï
90  
q
100  
1. Press the TV/AV button to select the PC mode.  
2. Press the MENU button.  
y
AUTO  
2. Connect the Audio cable  
from the PC to the PC  
3. Press the PRxy button to select the desired  
picture item.  
4. Press the VOLÏq button to make appropriate  
adjustments.  
1024 X 768  
Audio IN of the set.  
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>  
3. Press the TV/AV button to  
select PC mode.  
4. Switch on the PC, and the PC screen appears on the set.  
The set can be operated as the PC monitor.  
Contrast  
Clock  
Phase  
Auto  
POWER  
Brightness  
Temperature  
H-position  
V-position  
AUTO  
Resolution  
Reset  
Horizontal  
Vertical  
Mode  
Resolution  
frequency (KHz) frequency (Hz)  
Contrast  
640X480  
640X480  
640X480  
640X480  
640X480  
720X400  
31.5 KHz  
35 KHz  
37.9 KHz  
37.5 KHz  
43.5 KHz  
31.5 KHz  
60 Hz  
67 Hz  
72 Hz  
75 Hz  
85 Hz  
70 Hz  
This function is to adjust picture to light/dark.  
Brightness  
VGA  
SSM  
PSM  
This function is to adjust brightness of picture.  
Temperature  
Temperature is a measure of the warmth of the image color.  
Horizontal Position/Vertical Position  
This function is to adjust picture to left/right and up/down  
as you prefer.  
I/II  
Q.VIEW  
PRV  
MENU  
TV/AV  
800X600  
800X600  
800X600  
800X600  
800X600  
35.2 KHz  
37.9 KHz  
48.1 KHz  
46.9 KHz  
53.7 KHz  
56 Hz  
60 Hz  
72 Hz  
75 Hz  
85 Hz  
CVOL  
VOLB  
OK  
SVGA  
XGA  
PRW  
Clock  
This function is to minimize any vertical bars or stripes visible  
on the screen background. Horizontal screen and centering  
will also change.  
TEXT/MIX  
UPDA TE  
SIZE  
SLEEP  
INDEX  
1024X768  
1024X768  
1024X768  
1024X768  
48.4KHz  
56.5 KHz  
60.2 KHz  
68.7 KHz  
60Hz  
70 Hz  
75 Hz  
85 Hz  
TIME  
REVEAL  
Note: Refer to the recommended resolution chart on  
page 22.  
Phase  
This function allows you to remove any horizontal noise and  
clear or sharpen the image of characters.  
Auto  
576p  
1080i  
50Hz  
50Hz  
HDTV  
This function is for the automatic adjustment of the screen  
position, clock and clock phase. The displayed image will disappear for a few  
seconds while the Auto-configuration is in process.  
Note:  
Note: Some signal from some graphics boards may not function properly. If the  
results are unsatisfactory, adjust your monitor’s position, clock and clock  
phase manually.  
a. If the set is cold, there may be a small “flicker” when the set is switched on.  
This is normal, there is nothing wrong with the set.  
b. Some dot defects may appear on the screen, like Red, Green or Blue spots.  
However, this will have no impact or effect on the monitor performance.  
c. When resolutions are displayed that are not native to the panel resolution,  
text may appear choppy or lines may appear to be bold or thicker than others.  
To minimize, choose a resolution similar to the panel.  
Reset  
This function allows you to return to the good picture reproduction programmed at  
the factory and cannot be changed.  
5. Press the TV/AV button to store the adjustment.  
22  
23  
 
Product Spec.  
Troubleshooting  
Model  
NLT-15  
Problem  
Check item  
Horizontal size 455 mm  
Thickness 210 mm  
Weight 6.3 kg  
• Insert the AC power cord plug securely in AC power  
outlet.  
Main body  
No picture on screen and no sound  
from speakers.  
Height  
405 mm  
• Make sure the LCD TV is not in the standby mode  
(The POWER/Standby indicator is red.)  
Power requirements  
Television system  
Television programnme  
Display Panel  
DC 12V/3.0A  
• Check the brightness setting of the display.  
• Lamp may have malfunction.  
No picture/No picture from AV  
terminal.  
PAL/SECAM-B/G, I, D/K /NTSC-M  
VHF: 2~13 UHF :14~69 Cable : 01~125  
LG Philips LCD 15.1" TFTLCD panel  
45W  
• Check the sound setting.  
• Make sure the sound is not muted.  
• Make sure the connectors of the optional speaker  
system are securely inserted.  
Picture is displayed, but no sound  
from the speakers.  
Power consumption  
External antenna impedance 751  
Picture is too light.  
Picture is too dark.  
• Make sure COLOR and CONTRAST settings.  
• Make sure BRIGHTNESS setting is not set too low.  
• Check to see if BRIGHTNESS setting.  
• Lamp may have malfunction.  
Audio output  
Speaker  
1.5W + 1.5W  
81 X 2  
• Change the batteries.  
• Make sure the infrared transmitter window is not  
receiving strong light such as light from fluorescent  
lamps.  
Remote control does not work.  
• A/V IN  
• PC IN  
• S-VIDEO IN  
External input ports  
AC Power Adaptor  
• PC Audio IN  
• DC 12V IN  
• COMPONENT IN  
• Antenna IN  
• The reception may be weak.  
The TV picture is not sharp.  
The TV picture moves.  
• The state of the broadcast may also be bad.  
• Make sure the antenna is facing the right direction.  
• Make sure the outside antenna is not disconnected.  
AC 100-240V, 50/60Hz, Output:12vdc, 3.0A  
• Make sure the antenna is facing the right direction.  
• There may be reflected electric waves from  
mountains or buildings.  
The TV picture is doubled/tripled  
(Ghosting)  
• Although the LCD panel uses highly precise technology, it may display blank pixels,  
dark spots or lighting pixels on the screen. This is normal and not an indication of a  
defect.  
• There may be interference from automobiles, trains,  
high voltage lines, neon lights, etc.  
• There may be interference between the antenna cable  
and power cable. Try positioning them further apart.  
The TV picture is spotted.  
• Technical specifications are subject to change without notice.  
• Is the unit receiving interference from other devices?  
Transmission antennas of radio broadcasting stations  
and transmission antennas of amateur radios and  
cellular phones may also cause interference.  
There are stripes on the screen or  
colors fade.  
• Use the unit as far apart as possible from devices  
that may cause possible interference.  
• Unplug the power cord of the adaptor from the AC  
outlet to turn off and reset the unit.  
Power button does not respond.  
PC image not centered.  
• Check the horizontal/vertical position setting.  
• Check Clock and phase settings.  
Try using ‘Auto’ function setting.  
PC image not clear or has stripes.  
24  
25  
 
NEC Australia Pty. Ltd.  
ABN 86 001 217 527  
Home Electronics Group  
NEC Service Centres  
New South Wales  
Sydney  
184 Milperra Rd, Revesby 2212  
(02) 9780 8688  
(02) 4926 2466  
Newcastle 120 Parry Street, Newcastle West 2302  
Victoria  
Melbourne Unit1/6, Garden Road, Clayton, 3168  
131-632  
Queensland  
Brisbane  
Unit 4/305 Montague Road, West End, 4101  
131-632  
Southport Shop 1, 48 Ferry Road, Southport 4215  
(07) 5591 3670  
South Adelaide  
Adelaide  
84A Richmond Rd, Keswick, 5053  
(08) 8375 5710  
Western Australia  
Perth 45 Sarich Court, Osbome Park 6017  
(08) 9445 5901  
For Service in outer areas, please contact your NEC retailer for the  
address of the nearest Authorised NEC Service Centre  
NEC Australia Pty. Ltd.  
Home Electronics Group  
244 Beecroft Road EPPING 2121  
Tel:131-632  
Fax:(02) 9877 2353  
 

Miller Electric Welder OM 842 User Manual
MTD Lawn Mower 111 200 User Manual
Multiquip Landscape Lighting BGMP User Manual
Network Instruments Network Card 10 100 Full Duplex User Manual
Niles Audio Calculator HD83 User Manual
Nokia Cordless Telephone SGH D830 User Manual
Omega Stud Sensor FTB600B User Manual
Palsonic CRT Television 5159G User Manual
Panasonic Electric Shaver ES8080 User Manual
Panasonic Handheld Game System FZ 10 User Manual